Optimal stage dimensions: 10 x 10 m
Minimal stage dimensions: 9 x 9 m
Minimal height of the grid: 7 m
Ampty stage – no side nor back curtains
Light board + sound board placed in the auditorium
> stage and light plan are available here
a) the set fixed by pulleys and ropes on the grid:
– 8 frames 1,22 m x 2 m large with LEE 271 mirror foil (brought by the company)
– 24 ropes 20 m long for hanging the frames is being supplied by the venue
– 3 or 4 borders for covering the mirrors are being supplied by the venue
The first border downstage is covering all the width of the opening up to aproximatly 4 meters above the dance floor. The height of it is going to be adapted to the venue, acording to the public view.
It is possible to use the back drop as first border in the high venues.
The company travels with all the pulleys
b) the set on the floor:
– 3 x mirror 1,4m x 0,35m downstage (brought by company).
– white dance floor 7m x 7m (brought by company) in the centre of stage
– white tape for the dancefloor is provided by the venue.
It is requested that the stage and the grid are empty at the arrival of the company
– 1 CD and 2 MD players
– mixing console with min. 4 sub + 2 main outputs
– 2 x 30 band grafic EQ on main output
– digital delay line for downstage speakers
– desk lamp
– headphones
Speakers:
– upstage: 2 x speakers 2 x 15" / 1 x 1", 500W RMS, full range
– downstage: 2 x speakers mid/hi + subwoofer
– min 2 x speakers min. 1 x 8" / 1 x 1", full range, with possibility of placing them behind the public or
on the side of auditorium or on balcony
Total amount of these speakers depend on the size of the auditorium (cca 1 pair for each 200 seats)
– all these pairs must be amplified independantly
Power must be adequate for the size of the stage and auditorium
| List of light equipement required: | |
| 1 x | HMI Fresnel 2,5 Kw with shutters and barndoors or 1x400 W metalic discharge light with barndoors |
| 2 x | PC 2 Kw |
| 2 x | Profile 2 Kw |
| 21 x | ETC Profile 15/30 |
| 18 x | PAR 64 CP 60 |
| 2 x | AIR CRAFT ACL 2 Kw (two sets of 8 x 24 V lamps) |
| 18 x | floor stands |
| 6 x | side towers 1 m + 1,6 m high, or side bars stage left and stage right for the side lights |
| 6 x | filter Lee 281 or Lee 201 + Lee 202 for Par 64 |
All the projectors are required to be equiped with frames and barndoors.
Dimmers:
48 x 2 Kw dimmer channels
DMX light board 48 channels with 48 submasters
All the cabling and fixing material is being suplied by the venue
Touring company consists of six members:
3 dancers
2 technicians
1 choreographer / tour manager
Arrival day of the company is always two days before first performance. We do need one day before the performance for setting up the decor, lights, sound and for technical run through.
Accommodation:
2 twin rooms
2 single rooms
Travel costs:
Cie. travels by one van (2 technicians, tour manager + set) from Prague / CZ
one flight from Amsterdam / Netherlands
one flight from Sofia / Bulgaria
one flight from Rome / Italy
is required
Travel costs can be discussed depending on company‘s tour before and after required performance.
Per-diems 6 x 30,-EUR per day
3 days for 1 performance, 4 days for 2 performances etc.
Performance fee
